Freefly Alta X
The Freefly Alta X is designed from the ground up to capitalize on the benefits of large, efficient props while maintaining the crisp control and unmatched precision the Alta line is known for.
Designed to Perform
Fly a Mōvi Carbon (~ 9kg payload) for 20+ minutes, or a max payload for 15 minutes.
With smaller payloads, flight times can exceed 40 minutes.
Carry up to a ~ 15kg payload while maintaining a 2:1 thrust to weight ratio.
Small Footprint – Big Impact
Alta X folds to half its normal size with the push of a finger. The folding linkages also stiffen the booms to ensure low vibration and precise flight characteristics.
Alta X Specs
Dimensions
- Unfolded Diameter (not including props) 1415 mm
- Unfolded Diameter (Including Props) 2273 mm
- Folded Diameter 877 mm
- Height 387 mm
- Height (Skyview) 434 mm
Powerplant
- Number of Motors 4
- Motor Make and Model DJI E7000
- Motor Max Continuous Power Output 100 A
- Motor Max Instantaneous Peak Power Output 130 A (>3s)
- Maximum RPM (Flat Rated)
- Equivalent Kv 115 rpm/V
- Electronic Speed Controller DJI 12100
Propellers
- Make and Model DJI R3390
- Material Ultra Carbon Pro
- Propeller Orientation (2) CW and (2) CCW Props
- Propeller Type 840 x 230 mm Folding
Battery
- Nominal Battery Voltage 44.4V
- Maximum Battery Size (Groundview)
- Maximum Battery Size (Skyview)
- Battery Connectors XT-90
- Required Minimum Battery Discharge Rating (Per Pack) 250A
Versions:
Alta X Case contains additional:
- One Tough Pelican Hardcase
- Exterior Dimensions – 30x30x20.18″ (76.2×76.2×51.26cm)
- Weight – 55lbs (24.95kg)
Optional FPV System for Alta X also includes:
- Qty 1 – RunCam Eagle 2 Pro (NTSC)
- Qty 1 – Isolated FPV camera mount
- Qty 1 – TBS Unify Pro 5.8Ghz V3 Transmitter
- Qty 1 – Transmitter mount
- Qty 1 – Transmitter antenna
Futaba 14SG – Alta X additionally contains:
- Qty 1 – Futaba 14SGH
- Qty 1 – FASSTest-2.4GHz Bidirectional R7008SB receiver
Optional FPV System for Alta X + Futaba 14SG additionally includes:
- Quantity 1 – RunCam Eagle 2 Pro (NTSC)
- Quantity 1 – Isolated FPV camera mount
- Quantity 1 – TBS Unify Pro 5.8Ghz V3 Transmitter
- Quantity 1 – Transmitter holder
- Quantity 1 – Transmitter antenna
- Quantity 1 – Futaba 14SGH
- Quantity 1 – FASSTest-2.4GHz Bidirectional R7008SB Receiver