Standard set of CAMremote contains the CAMremote-3 Controller, CR-PC USB Configuration Cable (USB A-type, 70cm/27.6″ or 13cm/5.1″) and 3 JR/Futaba-style Cables (with 3-pin female terminals, length 15cm/5.9″ – 2g/cable). Note – Standard Set does NOT contain cable for camera control, choose suitable cable below. Enter camera model(s) to ‘Cameras’ field if you would like to have pre-configured setup.
CR-Camera USB Cable for Canon PowerShoot/dSLR, Nikon dSLR or Ricoh GX-series cameras (USB Mini-B type plug) if you intend to use USB/PTP or USB/CHDK method (length 35cm/13.7″ – 15g). Type of suitable USB connector on camera is also shown in the following figure. Be sure your camera have same connector! This is not suitable Nikon […]
Cable with Infrared LED if you intend to use infrared control method of the camera (length 30cm/11.8″ – 5g). Suitable for many Canon/Nikon/Sony/Pentax cameras and camcorders. For example it can control movie recording and shutter release on Sony NEX-5/6/7 and A35/A57/A65/A77 DSLR cameras.
Cable with 2 Infrared LEDs if you intend to use infrared control method of the 2 cameras simultaneously (both branches have length 27cm/10.6″ – 8g). Suitable for many Canon/Nikon/Sony/Pentax cameras and camcorders. For example it can control movie recording and shutter release simultaneously on 2 Sony NEX-5/6/7 and A35/A57/A65/A77 DSLR cameras.