Showing 541–552 of 562 results

  • 172.60 (Excl. VAT)

    GoPro3 60° Ultra sharp lens replacement kit

    Feel free from “fish eye effect” – Gopro Hero 3 and 3+ has now replacement lens wich will remove the wide fisheye effect eternaly. These lens are much better even darker condition. High quality lens video example taken from the ground are shown below. Test video from the ground: 2,7K downgraded to 1080p: Link to the […]

  • 106.55 (Excl. VAT)

    Tattu 9000mAh 14.8V 25/50C 4S1P Lipo Battery Pack

    TATTU 9000mAh 14.8V 25/50C 4S1P Lipo Battery Pack, used for Cinestar, DJI S800 EVO and professional UAVs. Spec: – Product Type:lipo battery pack – Capacity: 9000mAh – Voltage: 14.8V – Max Continuous Discharge: 25C (225A) – Max Burst Discharge: 50C (450A) – Weight: 809g – Dimensions: 208*73*25 mm – Balance Plug: JST-XH – Discharge Plug:N/A […]

  • 62.40 (Excl. VAT)

    Gens ace 6000mAh 11.1V 35C 3S1P Lipo Battery

    Gens ace 6000mAh 11.1V 35C 3S1P Lipo Battery suit to RC model – Product Type: lipo battery pack – Capacity: 6000mAh – Voltage: 11.1V – Max Continuous Discharge: 35C (210A) – Max Burst Discharge: 70C (420A) – Weight: 450.8g – Dimensions: 144*45*30mm – Balance Plug: JST-XH – Discharge Plug: banana plug or T-plug – Charge […]

  • 50.00 (Excl. VAT)

    VULCAN Mantis 440mm Z Arm – Red

    Straight swap upgrade for existing Multiframes. The radical Z arm design of the Vulcan Mantis offers unparalelled forward camera view, keeping arms and props out of the shot even with a forward facing camera during fast forward flight. You can even look up! Flight characteristics are fantastic, with great stability and handling. The raised arms […]

  • 48.50 (Excl. VAT)

    VULCAN Mantis 440mm Z Arm – Black

    Straight swap upgrade for existing Multiframes. The radical Z arm design of the Vulcan Mantis offers unparalelled forward camera view, keeping arms and props out of the shot even with a forward facing camera during fast forward flight. You can even look up! Flight characteristics are fantastic, with great stability and handling. The raised arms […]

  • 44.50 (Excl. VAT)

    VULCAN Motor Mounts for Tiger U7 Motors (pair)

    Made from 3mm carbon fibre, this motor mount is designed to be used with Tiger U7 motors for co axial motor mounting. This is a listing for a pair of mounts, and includes 4 x 30mm pillars and 8 x M3 8mm bolts.

  • 40.50 (Excl. VAT)

    Vulcan MultiFrame Motor Mount & Support Plate for Tiger U8 Motors in a Single Motor per Arm Configuration

    Made from 3mm carbon fibre, this motor mount is designed to be used with a Tiger U8 motors when used in a single motor per arm configuration. Also included is a 1.5mm carbon support plate, and 4 x 30mm pillars and 8 x M3 8mm bolts (not shown).

  • 8.20 (Excl. VAT)

    A1 Silicone Gel Anti Vibration Mounting Bush

    Soft silicone gel mounting bush ideal for the reduction of low frequency vibration. Optimum working load 300g to 600g per bush.

  • 14.50 (Excl. VAT)

    VULCAN Multiframe – Motor Ring Support for Top Mounted Motors

    Made from 1.5mm highest quality carbon fibre, the motor ring is designed to be used under the standard motor mount when a top mounting position for the motor is used. This spreads the load on the bolts on the underside of the arm, and offers greater support for the motor mount when managing the increased […]

  • 134.90 (Excl. VAT)

    VULCAN 200mm Silicone Gel Anti Vibration Plate

    Made from 2mm Carbon Fibre sheet, the Gel Mount Adapter provides an ultra low vibration mounting method for a variety of payloads, gimbals, undercarriage and more. The plate is designed bolt straight up into the main lower frame plate and can be fitted with 4 to 12 A1 Gel Bushes for different payloads. The position […]

  • 44.00 (Excl. VAT)

    400A Power Distribution Board for Large MultiCopters

    Vulcan Power 400A Power Distribution Board Power distribution board for large multicopters. This board uses 2mm thick copper sheet to provide huge current handling capacity, with 13 pairs of solder pads to handle all you battery, ESC and power feed requirements. Diameter: 64mm Weight: 50g Mounting Holes: 3mm Copper Thickness: 2mm Solder pad diameter: 7mm […]