|
Description |
DayBright Navigation LED System for large motor mounts
The Vulcan DayBright LEDs system consists of four LED modules designed to fit between the plates of our larger motor mounts. Each unit includes a 1.5W super bright LED behind diffuser material for the best light spread. Each set consists of one green (starboard – right), one red (port – left) and two white LED modules. The set also includes the controller which can control each LED independently, and offers 28 user selectable flash patterns. The LEDs can also be switched on and off from your RC controller.
Each module is fitted with 900mm of wire to fit even the largest machines.
VULCAN-DayBright-LED-System-Manual |
D-RTK 2 High Precision GNSS Mobile Station
Overview
Gain improved relative accuracy with centimeter-level precision positioning data using the D-RTK 2 High Precision GNSS Mobile Station, which supports all major global satellite navigation systems and provides real-time differential corrections.
Highlights
Supports: GPS: L1 C/A, L2, L5; BEIDOU: B1, B2, B3; GLONASS: F1, F2; Galileo: E1, E5A, E5B
Connect multiple drones to conduct coordinated operations
IP65 Ingress Protection
In The Box
D-RTK 2 Body × 1
Extension Rod × 1
Charging Hub × 1
AC Power Adapter × 1
Intelligent Battery (WB37) × 2
Battery Cover × 1
AC Power Cable × 1
USB-C Cable × 1
USB-C OTG Cable × 1
Hex Key × 1
Specifications
Simultaneously receives: GPS: L1 C/A, L2, L5; BEIDOU: B1, B2, B3; GLONASS: F1, F2; Galileo: E1, E5A, E5B
Positioning Accuracy:
Single Point
Horizontal: 1.5 m(RMS)
Vertical: 3.0 m(RMS)
RTK
Horizontal: 1 cm+ 1 ppm(RMS)
Vertical: 2 cm+ 1 ppm(RMS)
1 ppm: For every 1 km increase in distance, the accuracy will be 1 mm less. For example, the horizontal accuracy is 1.1 cm when the receiving end is 1 km away from the base station.
Ingress Protection Rating: IP65
Operating Temperature: -20° to 55° C (4° to 131° F )
Compatibility
Matrice 300 RTK
Phantom 4 RTK
|
Made from 2mm Carbon Fibre sheet, the Gel Mount Adapter provides an ultra low vibration mounting method for a variety of payloads, gimbals, undercarriage and more. The plate is designed bolt straight up into the main lower frame plate and can be fitted with 4 to 12 A1 Gel Bushes for different payloads. The position of the gel bushes can be moved to accomodate different payload balances, and to fit the available holes in the main frame base plate according to the frame arm configuration being used. Gel bushes work best under load (300g - 600g per bush) and so by supporting the entire payload - gimbal, batteries and even in some cases the landing gear - they will work at their best giving excellent vibration damping.
Although the plate is drilled to bolt directly to PhotoHigher AV130 and AV200, Cinestar CS2 and AeroXCraft gimbals, we recommend the use of the Basic S800 style adapter for ultimte gimbal and payload support, and this allows mounting of gimbals in various positions, both under and out front of the frame. It can also take the 390mm Carbon Fibre undercarriage and the S800 retract system. Eight gel bushes, nuts, bolts, pillars and washers are provided.
A variety of battery mounting options are available to allow great flexibility in how you carry your payload. Please feel free to contact us shoiuld you need advice on the most suitable system for your application. |
Gens ace 5300mAh 22.2V 30C 6S1P Lipo Battery Pack
Gens ace lipo 5300mAh 6S1P 30C lipo battery packs Max Burst Discharge:60C,Gens ace lipo 5300mah 6s1p battery suited to the following model: It is suit for Align ,GAUI ,KDS , ElyQ Trex-700 600,airplane
- Product Type:lipo battery pack
- Capacity: 5300mAh
- Voltage: 22.2V
- Max Continuous Discharge: 30C (159A)
- Max Burst Discharge: 60C (318A)
- Weight: 800g
- Dimensions: 139* 41 * 61mm (L * W * H)
- Balance Plug: JST-XH
- Discharge Plug: N/A
- Charge Rate: 1-3C Recommended, 5C Max |
Vulcan Mantis 900mm Hexa
The Vulcan is a true professional 'workhorse' frame, very strong and stiff with very low vibration, and totally modular in design, so configuration can be changed at any time. The radical arm design of the Vulcan Mantis offers unparalelled forward camera view, keeping arms and props out of the shot even with a forward facing camera during fast forward flight. You can even look up!
A wide range of accessories and upgrades are available to cover most applications, including dedicated Power Distribution, gimbal mountings, anti vibration system, side or rear battery trays, quick release mounts, top mounted motor options and more. Flight characteristics are fantastic, with great stability and handling, and the raised arms are also an invaluable aid to the pilot for machine orientation in the air. No special setup is required in your flight controller and the Z arms are also a 'straight swap' upgrade for existing Vulcan Multiframes.
Z Arms are available in BLACK or RED - please specify when ordering!
Supplied with 350mm High Landing Legs
All Multiframe kits now include Motor Ring Supports for
Top Mounted Motors (not on the main product picture) - see product gallery items
USER MANUAL: VULCAN MultiFrame Manual V1.05 |
