|
Description |
For cameras:
EOS-Series: 1D, 1Ds, 1D Mark II-IV, 5D, 7D, 10D, 20D, 30D, 40D, D30, 50D
CR-Camera 3-pin Remote Port Cable for Canon dSLR (default length 25cm/9.8" - 12g). Controls Focus and Shutter release features of the camera. Possible to use continuous/bulb mode shooting. Type of suitable connector on camera is also shown in the following figure. Be sure your camera have same connector! Connect it to USB port of the CAMremote. |
Remote control through MULTI interface:
DSC-Series: HX50(V), HX60(V), HX300(V), HX400(V), RX10, RX10M2, RX100M2, RX100M3, RX100M4
ILCA-Series: A77M2
ILCE-Series: A7, A7R, A7M2, A7S, A3000, A3500, A5000, A5100, A6000, NEX-3N, QX1, etc
SLT-Series: A58
Remote control through USB interface:
DSC-Series: RX10M2, RX100M4
ILCE-Series: A7*, A5000, A5100, A6000
ILCA-Series: A77
SLT-Series: A58, A99
DSLR-Series: A700, A850, A900
CR-Camera 5/10-pin Multiterminal+USB Combo Cable for Sony cameras (length 32cm/11" - 10g). here are 2 options: cable with direct plug (occupies space beside of camera about 30mm) and with 90-degree plug (occupies space beside of camera about 10mm). Controls zoom (mostly 2 speed option), movie recording, auto focusing, shutter release* and camera off/wakeup features of the camera through MULTI interface. USB connection can be used to charge the camera on the fly or for remote control (Shutter speed, aperture, ISO and Movie recording). Can be used both MULTI+USB remote control features. Be sure your camera have Multiterminal jack! Connect plug with double-wires to USB-LANC/RP port of the CAMremote and plug with single wire to USB/IR/RP port of the CAMremote or to external device for USB connection or powering the camera. See example configuration. Read more about MULTI/LANC interface from here.
* AF and Shutter release, Av, Tv, ISO functions are not available if CAMremote is connected to PC |
