Open: Mon to Fri 09.00 -17.00 PM | www.professional-multirotors.com

logo

DJI A3 Flight Controller

898.80 (Excl. VAT)

In Stock

Availability: In stock

On pre-order

Compare

DJI A3 – Reliable and Accurate Flight Control

The most advanced DJI flight controller yet, the DJI A3 has been designed for professional and industrial applications, where reliability and the ability to customise are essential. This flight controller, designed for DJI’s professional frames such as the DJI Matrice 600, uses multi-sensor fusion algorithms to improve the A3’s control accuracy and is SDK compatible to enable industry experts to personalise and customise their aerial system to suit their needs.

As advanced as this technology is, DJI have simplified the DJI Assistant 2 which makes it easy to setup the complete DJI aerial solutions. It has an integrated flight simulator where you can practice complex maneuvers without risking the aircraft.

Features

  • Triple Modular Redundancy: if you upgrade the A3 to the A3 Pro then the flight controller will have three IMUs and three GNSS units which will give you a total of six redundancies. This, combined with advanced diagnostic algorithms ensures that there will be backup units if a GNSS or IMU fails in-flight, giving you peace of mind and trust in the reliability of your aircraft
  • Precision Fault-Tolerant Control: the advanced algorithms allow the A3 and A3 Pro to be compatible with and adapted to a range of aircraft without having to manually tune. The A3 control system also enables the aircraft to land safely, even in the event of a propulsion system failure or problem
  • Complete Industry Solutions and SDK Compatibility: the A3 series form part of a complete industry solution when combined with D-RTK GNSS, smart ESCs, intelligent batteries and the Lightbridge 2. They have both Onboard and Mobile SDKs which allow custom-designed applications to access flight data and control the aircraft, gimbal and camera. They have CAN and API ports which enable industry experts to craft their perfect aerial system by adding actuators and sensors
  • Ground Station Compatibility: the intuitive ground station supports both touch screen and mouse and keyboard inputs and supports mission design that can be used for a range of applications. Using the Ground Station you can manage and monitor several aircrafts’ mission implementations and plan formation flights
  • D-RTK GNSS: The A3 can be used with the D-RTK GNSS for centimeter-level accurate positioning, compared to a normal GPS and barometer. It uses dual antennas which make its heading reference more accurate than a compass sensor. It’s also able to withstand magnetic interference from metal structures
  • Datalink Pro Compatible: this Datalink Pro can be integrate with the A2, D-RTK and Ground Station and allows up to 5 aircraft to be controlled from one base station. It has a range of up to 2km and in ‘broadcast’ mode can broadcast data to up to 32 mobile devices. Alternatively, a ‘duplex’ mode keeps the data locked to one device only
  • Next Generation DJI Assistant: Simple yet powerful, the DJI Assistant 2 allows you to easily set up a range of DJI aerial systems. Within the Assistant is a built-in flight simulator and a Ground Station which supports touch screen integration, offline mission design, route planning and formation flights for multiple aircraft

Specifications

General

Weight A3 Pro: 386g
A3: 186g
Power Consumption A3 Pro: Max. 16W
A3: Max. 8W
Size Controller: 64mm x 42mm x 19.5mm
PMU: 51mm x 34mm x 13.5mm
External IMU: 34mm x 26.5mm x 20mm
GPS-Compass Pro: 61mm (diameter) x 13mm
LED: 27mm x 27mm x 8mm
Built-in Functions
  • Built-in PMU
  • Intelligent Flight Modes
  • Low voltage protection
  • DJI Smart Battery Protection
  • Motor overload detection
  • External SBUS receiver
  • Lightbridge 2 receiver
  • 8 function channels (including 4 configurable direction channels)
  • SDK

Flight Performance

Maximum Wing Resistance <10m/s
Max Yaw Angular Velocity 150 deg/s
Max Tilt Angle 35°
Ascent/Descent Ascent: 5m/s
Descent: 4m/s

SDK

SDK Mobile SDK
Onboard SDK
SDK Port API/CAN2

Extending Function

PWM I/O Ports F1-F4 ports for output F5-F8 ports for I/O function
iOSD Data Storage Built-in data recorder
Ground Station It can be realized in DJI GO APP With Lightbridge 2, and in PC Ground Station with Lightbridge 2 or DATALINK PRO.
Intelligent Flight Modes (with Lightbridge 2) Point of Interest, Waypoints, Home Lock and Course Lock.
Remote Parameter Adjustment It can be realized in DJI GO APP With Lightbridge 2
PC Assistant DJI ASSISTANT 2, support simulator

Hovering Performance

Hovering Accuracy
  • Vertical: ± 0.5m
  • Horizontal: ± 1.5m
DJI RTK GPS
  • Vertical: ± 0.03m
  • Horizontal: ± 0.02m

Peripheral

Supported Multi-rotor Quadcopter: I4,X4;
Hexacopter: I6,X6,Y6,IY6
Octocopter: X8,I8,V8
Supported ESC 400Hz frequency
Recommended Battery 3S to 12S LiPo or DJI Smart Battery
Assistant Software System Requirement Windows 7 /8 /10 (32 or 64 bit)
Mac OS
Recommended Radio Lightbridge 2, S-BUS or D-BUS
Other DJI Products Supported Z15, Ronin-MX, S900, S1000, S1000+,iOSD, D-RTK, DATALINK PRO etc.
Operating Temperature -10°C to +45°C

Protection

Motor Fail Protection Minimum 6 axis
Propulsion Protection Motor Overload
No Fly Zones Supported
Low Battery Level Warning (only for DJI Intelligent Flight Battery) Smart RTH
Low Battery Voltage Warning Supported

In The Box

1 x Flight Controller
1 x GPS-Compass Pro
1 x LED Module
1 x PMU
1 x GPS Mounting Bracket
1 x LED Mounting Bracket
1 x CAN-Gimbal Cable
1 x ~Micro-USB Cable
5 x Servo Cable
1 x DBUS Cable
1 x Screw Pack
3 x Cable Tie
4 x Double-sided Adhesive
1 x Manual

Weight 0.5 kg
Dimensions 20 × 15 × 10 cm
BACKORDER

1 0 go top