Showing 13–24 of 32 results

  • 79.20 (Excl. VAT)

    DJI Zenmuse X5 Vibration Absorbing Board for Inspire 1 Quadcopter

    This part is required when adding a DJI Zenmuse X5 camera, on to a DJI Inspire 1 quadcopter. The vibration absorbing board will protect against jello effect whilst in flight, creating a much smoother image.

  • 2.92 (Excl. VAT)

    DJI TB48 LiPo Battery Insulation Sticker – Part 51

    Insulation Sticker for a TB48 LiPo Battery – Part 51 This insulation sticker will help maintain the TB48 LiPo Battery at the optimal temperature during cold weather operations. The sticker should be applied in environments where the temperature is below 5 degrees Celsius.

  • 165.83 (Excl. VAT)

    TB50 Intelligent Flight Battery

    TB50 Intelligent Flight Battery DJI Inspire 2/ Matrice M200 TB50 Intelligent Battery (4280mAh) On the Inspire 2 these batteries provide a 25 minute max flight time each with the Zenmuse X5S camera and a 27 minute time with the Zenmuse X4S. The DJI TB50 batteries are made to use a higher performance and a higher […]

  • 89.20 (Excl. VAT)

    DJI Inspire 1 Car Charger – Part 71

    DJI Inspire 1 Car Charger Part 71 Suitable for TB47 and TB48 batteries for the Inspire 1 Series. This charger will also charge the remote controller battery. Charge time: TB47 – 1 hour 40 TB48 – 2 hours Controller – 3 hours 20

  • 20.83 (Excl. VAT)

    Inspire 2 Quick Release Propellers (High-Altitude)

    Inspire 2 Quick Release Propellers (High-Altitude) Improve the Inspire 2’s high-altitude (2500-5000m) performance. Including a pair of propellers, one clockwise replacement propeller and one counter-clockwise replacement propeller. The Quick Release Propellers (for high-altitude operations) improve the performance of the Inspire 2 at high-altitude (2500-5000m) locations. A larger propeller pitch increases the aircraft’s propulsion force at […]

  • 4.40 (Excl. VAT)

    DJI Inspire 1 Landing Gear Riser Kit – Part 72

    DJI Inspire 1 Landing Gear Riser Kit – Part 72 This will lengthen the landing gear of the DJI Inspire 1 or DJI Inspire 1 V2 in order to install the DJI X5 or X5R cameras.

  • 15.83 (Excl. VAT)

    DJI Universal Remote Controller Lanyard

    DJI Universal Remote Controller Lanyard Overview Its ergonomic design ease the pressure to the cervical vertebra. Useful to off-load the weight of the remote controller when flying for long periods of time so that you can focus on enjoying the flight. Highlights Hang the remote controller around the neck for more comfortable use In the […]

  • 14.17 (Excl. VAT)

    DJI Inspire 2 Quick Release Propellers 1550T

    DJI Inspire 2 Quick Release Propellers 1550T DJI Inspire 2 PART 06 1550T Quick Release Propellers This pack contains 1 x clockwise and 1 x counter-clockwise propeller.

  • 82.50 (Excl. VAT)

    DJI Inspire 1 Quadcopter Battery Charging Hub – Part No.55

    The charging hub will allow users to charge up to four DJI Inspire 1 batteries at the same time.

  • 33.33 (Excl. VAT)

    Sandisk 64GB Ultra Android microSDXC

    Sandisk 64GB Ultra Android microSDXC + SD Adapter + Memory Zone App 100MB/s A1 Class 10 UHS-I Sandisk Ultra Android microSDXC + SD Adapter + Memory Zone App 100MB/s A1 UHS-I 64 GB, MicroSDXC, Flash memory class 10

  • 90.83 (Excl. VAT)

    DJI Inspire 2 Battery Charging Hub

    DJI Inspire 2 Battery Charging Hub The Inspire 2 Intelligent Flight Battery Charging Hub is designed for use with the Inspire 2 Battery Charger. It charges up to four Intelligent Flight Batteries simultaneously. The battery pair* with more stored power will be charged first. The Charging Hub will intelligently charge batteries in sequence according to […]

  • 22.75 (Excl. VAT)

    DJI Inspire 1 Quadcopter ND8 Lens Filter

    The ND8 lens filter helps reduce the amount of light entering the sensor, allowing 1/8th of light through. This enables more control over the camera’s aperture. Please Note: This filter has been specifically designed to work with the DJI Zenmuse X3 camera.