|
Description |
DJI Inspire 1 Landing Gear Riser Kit - Part 72
This will lengthen the landing gear of the DJI Inspire 1 or DJI Inspire 1 V2 in order to install the DJI X5 or X5R cameras. |
Tattu lipo 10000mAh used for heavy lifter- Multi Rotor,Quadcopters, Octocopters,and Hexacopters. Tattu lipo 10000mAh 4S1P 25C/50C battery are widely used for pesticide spraying UAV,available UAV model:DJI S800,S800 EVO,s1000,Spider6,cinestar8,SteadiDrone EI8HT,draganfly x6,Turbo Ace X830-D ,800size DIY drones etc
Spec.
- Product Type:lipo battery pack
- Capacity: 10000mAh
- Voltage: 14.8V
- Max Continuous Discharge: 25C (250A)
- Max Burst Discharge: 50C (500A)
- Weight: 941.9g
- Dimensions: 166*64*41 mm
- Balance Plug: JST-XH
- Discharge Plug:EC5
- Charge Rate: 1-3C Recommended, 5C Max
Tattu lipo 10000mAh 4S1P 25/50C battery Suited to the following models: heavy lifgter- Multi Rotor,Quadcopters, Octocopters,and Hexacopters. Other model like Tow planes,3D planes,Scale helicopter,Align jet, Esky helicopter, Walkera airplane, E-flite huge plane. Draganflyer etc. |
The iCharger 4010Duo.
The solutions for professionals!
With two channels available, each of which can charge at up to 40 amps simultaneously, it's like having two superchargers in one.
Or combine both channels in parallel to achieve up to 70 amp charge rates!
With two JST-XH & Thunder Power balance boards thrown in for free - one for each channel you're ready for just about anything.
Specifications:
-Input voltage range: 9-50V DC
-Input current limit: 65A
-Maximum charge power capacity: 1400W per channel @ >23.5V (up to 2000W in synchronous mode)
-Charge current range: 0.05-40.0A per channel, or up to 70A in synchronous mode
-Discharge power capacity: 130W per channel, or up to 200W in synchronous mode
-Maximum regenerative discharge: 1400W per channel, or up to 2000W in synchronous mode
-Maximum external discharge power capacity: 1600W @ 40V/40A, or up to 3200W in synchronous mode
-Current drain for balancing: 1.2A per channel, or up to 2.4A in synchronous mode
-Balance accuracy: 10mV
-LiPo/LiIo/LiFe: 1-10 series per channel
-NiCd/NiMH battery cell count: 1-25 series per channel
-Pb battery cell count: 1-18 series (2-36V) per channel
-PC Connectivity: USB port
-Weight: 1470g
-Dimensions (LxWxD): 210x140x80 mm
-Warranty: 1 year |
30A Switching Power Supply
Your eFUEL switching DC Power Supply is designed to use household AC power source to power
equipments that required DC power. The eFUEL converts standard household power 110-120V AC
or 200-240V AC to 9-18V DC power and can supply up to 30 amperes of continuous power.
If you are R/C hobbyist, technician or electronic hobbyist, you will appreciate the many uses for the power supply at your workbench or in your house. For example, power your battery chargers, checking the operation of auto sound systems before you install them into your vehicle, use your CB mobile transceiver as a base station. To top it all off, you can even power your mobile phone, digital camera or even your iPhone via the USB port.
FEATURES
* Two DC power outputs, up to 30 amperes
* Output voltage adjustable 12-18V(Part No. PSU30ADU & PSU30ADE only)
* Large LCD indicates voltage and current amperes output (Part No. PSU30ADU & PSU30ADE only)
* Smart cooling fan
* Over temperature protection
* Over loading protection
* Short circuit protection
Voltage……………………………………………..….110V AC (Part No.PSU30ADU,PSU30AU)
220V AC (Part No.PSU30ADE,PSU30AE)
Input AC Frequency………………………………………………….……….….………50Hz/60Hz
Output Voltage………………………………………………………..……….……12-18V DC±0.5V
Output Current………………………………………………………………….……………30A±1A
Current Overload Protection…………………………………………………………≤31A 500MS
Input Fuse……………………………………………………………………….110V AC 10A Fuse
220V AC 5A Fuse
LCD Display…………………………………………………………….…Voltage Precision ±0.3V
Current Precision ±0.5A
Output Voltage Ripple……………………………………………………………..… ……<100MV
Power Efficiency………………………………………………………………………..………>80%
Power Factor………………………………………………………………………..……………>0.7
Over Temperature Protection………………………………………………….……………<100℃
Cooling Method…………………………………………………………………………Cooling Fan
Operating Temperature………………………………………………………………………0-40℃
Operating Humidity……………………………………………………………………………0-90%
Dimensions (L*W*H)………………………………………………………….....208x139x59.5mm
Net weight…………………………………………………………………………..…………1.50kg |
Tattu 4500mah 22.2V 25C 6S1P lipo battery packs Max Burst Discharge:50C,used for the RC model.
- Product Type:lipo battery pack
- Capacity: 4500mAh
- Voltage: 22.2VV
- Max Continuous Discharge: 25C (112.5A)
- Max Burst Discharge: 50C (225A)
- Weight:713 g
- Dimensions: 138*44* 56mm (L * W * H)
- Balance Plug: none
- Discharge Plug: none
- Charge Rate: 1-3C Recommended, 5C Max |
TATTU 12000mAh 14.8V 15/30C 4S1P Lipo Battery Pack,used for UAV
- Product Type:lipo battery pack
- Capacity: 12000mAh
- Voltage: 14.8V
- Max Continuous Discharge: 15C (180A)
- Max Burst Discharge: 30C (360A)
- Weight: 1064g
- Dimensions: 179*70*39 mm
- Balance Plug: JST-XH
- Discharge Plug:N/A
- Charge Rate: 1-3C Recommended, 5C Max |
|
BACKORDER |
3-5 working days on item backorder |
Delivery time 4-7 days on item backorder |
Delivery time 4-7 days on item backorder |
Delivery time 4-7 days on item backorder |
Delivery time 4-7 days on item backorder |
Delivery time 4-7 days on item backorder |
