Standard Set of the CAMremote-3w (2.4 GHz Wifi version)
CAMremote-3w is used to remote control all cameras* which have built in Wifi remote control support. It will create wireless bridge between CAMremote and camera so that remote control devices (like hobby radios etc) which are connected to CAMremote can control the camera. Common controllable features are AF, Shutter release, Movie recording, Zoom, settings of camera parameters etc but depends of specific camera capabilities (commonly same features which are available in camera's smartphone apps). Wifi transmitter is using very low power to emit radio signals so device should be attached close to camera (20 meters range). Note it doesn't support liveview streaming feature so Wifi link is not generating heavy traffic in 2.4GHz frequency band thus not generating interference to other radios at same frequency band. Device size is 36x23mm, weight 6g. See example configuration. Configuration can be done using PC configuration software. Smartphone's application is coming! Standard set of CAMremote contains the CAMremote-3w Controller with integrated Wifi, CR-PC USB Configuration Cable (USB A-type, 70cm/27.6" or 13cm/5.1") and 3 JR/Futaba-style Cables (with 3-pin female terminals, length 15cm/5.9" - 2g/cable). Note - CAMremote-3w is supporting wired connections as well. Standard Set does NOT contain cable for camera control, choose suitable cable below. Enter camera model(s) to 'Cameras' field if you would like to have pre-configured setup.BS30 Intelligent Battery Station
Overview
A portable and user-friendly battery station that can charge up to four flight batteries and two remote controllers at a time, as well as a set of batteries from 20% to 90% in half an hour, enabling batteries to be rotated seamlessly. The charging station also supports Standby and Storage modes.
[leap_gap height="20px" ]
Highlights
A portable and user-friendly battery station.
Charges up the batteries from 20% to 90% in half an hour
Supports Standby and Storage modes.
[leap_gap height="20px" ]
Tips
The cover of the battery station is not IP rated. Make sure the battery station is dustproofed and waterproofed.
[leap_gap height="20px" ]
In The Box
BS30 Intelligent Battery Box × 1
AC Cable × 1
Sticker × 1
User Manual × 1
[leap_gap height="20px" ]
Specifications
Form Factor: 353 × 267 × 148 mm
Tare Weight: 3.95 kg
Charging Time:
Approx. 30 min (charging two TB30 batteries from 20% to 90%)
Approx. 50 min (charging two TB30 batteries from 0% to 100%)
Maximum Input Power: 100-240 VAC, 50/60 Hz
Output Power: 525 W
Operating Temperature: -20 to 40 °C (14° to 104° F)
[leap_gap height="20px" ]
Compatibility
TB30 Battery，WB37 Battery
Tattu 10000MAH 22.2V 25C 6S1P LIPO BATTERY PACK
Tattu 10000MAH 22.2V 25C 6S1P LIPO battery pack used for DJI S800 , S800 EVO, S1000，CineStar 6, XL HexaCopter and other bigger VULCAN full-size multirotors. Spec. - Product Type:lipo battery pack - Capacity: 10000mAh - Voltage: 22.2V - Max Continuous Discharge: 25C (250A) - Max Burst Discharge: 50C (500A) - Weight: 1442g - Dimensions: 165* 65.12 *62.18mm - Balance Plug: JST-XH - Discharge Plug: EC5 - Charge Rate: 1-3C Recommended, 5C Max Tattu 10000mAh 22.2V 25C 6S1P，professional battery for UAV drones. With light weight, smooth discharge and long flight time, best suited for DJI S800 , S800 EVO, S1000，CineStar 6, XL HexaCopter and other full-size multirotors.Tattu 7000mAh 22.2V 25C 6S1P Lipo Battery
Spec. -Product Type:lipo battery pack -Capacity: 7000mAh -Voltage: 22.2V -Max Continuous Discharge: 25C (175A) -Max Burst Discharge: 50C (350A) -Weight: 907.50g -Dimensions: 136.48*42.07*68.28 mm -Balance Plug: JST-XH -Discharge Plug: XT90 -Charge Rate: 1-3C Recommended, 5C MaxVictory with Limited Edition
Tattu 1300mAh 4S1P 75C lipo battery packs Max Burst Discharge: 150C, Tattu 1300mAh 14.8V 75C/150C 4S1P Lipo Battery for FPV Racing Quadcopters. Suitable model :IRC Vortex 250 Pro & 285 (lightweight advanced setup), Lumenier QAV210 Charpu Edition/QAV180 & Raceblade, ZMR250 Energy Density:Special adapted to each UAV type and RC car/boat/heli type. Very High according to capacity/weight. In fact we are specialists of High Power Lipo Batteries.It is our unique technology,the highest power of our battery is 75C. The another technology is our batteries are able to be stable discharged simultaneously Low IR:Provides stable voltage untill the end of your mission Safety: Gens ace and its' partners ful fill the ISO9001, ISO14001, standards Net Weight (g) 156.4 Brand Tattu Capacity 1300 mAh Discharge Rate (C) 75 Max Cont Current (A) 97.5 Max Burst Current (A) 195 Max Burst discharge Rate (C) 150 Parallel (P) 1 Voltage 4S (14.8V) Length (mm) 72 Width (mm) 34 Thickness(mm) 28 Wire Gauge 12# Wire Length (C/D) 50mm / 100mm Connector Type XT60 Balancer Connector Type JST-XH TATTU 1300mAh 14.8V 75C/150C 4S1P Lipo Battery Specially Made for Victory with Limited Edition, IRC Vortex 250 Pro & 285 (lightweight advanced race setup), Lumenier QAV210 Charpu Edition/QAV 180 & Raceblade, ZMR250Note: HDR-AS200V camera is not remote controllable through MULTI interface. It provide composite video through MULTI interface.CR-Camera 5/10-pin Multiterminal LANC+A/V Cable for Sony camcorders/binoculars (length 32cm/11" - 10g). Controls zoom (mostly 8 speed option), movie recording and shutter release features of the camera. A/V cable has 3.5mm jack for composite video output and one audio channel. Also possibility to enter custom LANC codes if camera is supporting LANC interface. Be sure your camera have Multiterminal jack! Connect it to USB-LANC/RP port of the CAMremote. See example configuration. Read more about MULTI/LANC interface and it's limitations from here. Be sure your camera have same connector as shown on image!