|
Description |
CR-Camera Multiterminal LANC+A/V Combo Cable for Sony Camcorders/Binoculars
(not for Sony Still Cameras):
HDR-Series:CX210, CX220E/B, CX230E, CX240, CX280E, CX280, CX290E, CX320, CX380E, CX390, CX405, CX410, CX420, CX430V, CX630V, CX650V, CX900, GWP88VE/B, PJ220, PJ275, PJ320, PJ380, PJ390, PJ410, PJ420V, PJ430, PJ540, PJ620, PJ630V, PJ650V, PJ780V, PJ790V, PJ810, AS200, AX2000, FX1000, TD30, etc
DEV-Series: DEV-50
FDR-Series: AX100 4K, AX33 4K, AXP33 4K, X1000, etc
PXW-Series: PXW-X70
Note: HDR-AS200V camera is not remote controllable through MULTI interface. It provide composite video through MULTI interface.
CR-Camera 5/10-pin Multiterminal LANC+A/V Cable for Sony camcorders/binoculars (length 32cm/11" - 10g). Controls zoom (mostly 8 speed option), movie recording and shutter release features of the camera. A/V cable has 3.5mm jack for composite video output and one audio channel. Also possibility to enter custom LANC codes if camera is supporting LANC interface. Be sure your camera have Multiterminal jack! Connect it to USB-LANC/RP port of the CAMremote. See example configuration. Read more about MULTI/LANC interface and it's limitations from here. Be sure your camera have same connector as shown on image! |
DSC-Series: HX50(V), HX60(V), HX90(V), HX300(V), HX400(V), RX10, RX100II, RX100III, QX30
ILCE-Series: A7, A7R, A77, A3000, A3500, A5000, A5100, A6000, NEX-3N, QX1 etc
SLT-Series: A58
HDR-Series: CX220E/B, CX230E, CX240, CX280E, CX290E, CX380E, CX430V, PJ230, PJ240, PJ380, PJ430, PJ530, PJ620, PJ790, PJ810, GW66, etc
DEV-Series: DEV-50
FDR-Series: AX100 4K
PXW-Series: PXW-X70
HDR-AZ1* Contact us if you need remote control
Note: QX10/100 cameras aren't remote controllable through Multiterminal interface.
CR-Camera 5/10-pin Multiterminal Interface Cable for Sony cameras/camcorders (length 32cm/11" - 7g). There are 2 options: cable with direct plug (occupies space beside of camera about 30mm) and with 90-degree plug (occupies space beside of camera about 10mm). Controls zoom (mostly 2 speed option), movie recording, auto focus* and shutter release* features of the camera. Be sure your camera have Multiterminal jack! Connect it to USB-LANC/RP port of the CAMremote. See example configuration. Note cameras with Multiterminal interface doesn't offer composite video signal (except camcorders). For Sony camcorders consider option below. Read more about limitations of MULTI/LANC interface from here.
* AF and Shutter release functions are not available if CAMremote is connected to PC |
