Standard Set of the CAMremote-3w (2.4 GHz Wifi version)
CAMremote-3w is used to remote control all cameras* which have built in Wifi remote control support. It will create wireless bridge between CAMremote and camera so that remote control devices (like hobby radios etc) which are connected to CAMremote can control the camera. Common controllable features are AF, Shutter release, Movie recording, Zoom, settings of camera parameters etc but depends of specific camera capabilities (commonly same features which are available in camera's smartphone apps). Wifi transmitter is using very low power to emit radio signals so device should be attached close to camera (20 meters range). Note it doesn't support liveview streaming feature so Wifi link is not generating heavy traffic in 2.4GHz frequency band thus not generating interference to other radios at same frequency band. Device size is 36x23mm, weight 6g. See example configuration. Configuration can be done using PC configuration software. Smartphone's application is coming! Standard set of CAMremote contains the CAMremote-3w Controller with integrated Wifi, CR-PC USB Configuration Cable (USB A-type, 70cm/27.6" or 13cm/5.1") and 3 JR/Futaba-style Cables (with 3-pin female terminals, length 15cm/5.9" - 2g/cable). Note - CAMremote-3w is supporting wired connections as well. Standard Set does NOT contain cable for camera control, choose suitable cable below. Enter camera model(s) to 'Cameras' field if you would like to have pre-configured setup.BS30 Intelligent Battery Station
Overview
A portable and user-friendly battery station that can charge up to four flight batteries and two remote controllers at a time, as well as a set of batteries from 20% to 90% in half an hour, enabling batteries to be rotated seamlessly. The charging station also supports Standby and Storage modes.
[leap_gap height="20px" ]
Highlights
A portable and user-friendly battery station.
Charges up the batteries from 20% to 90% in half an hour
Supports Standby and Storage modes.
[leap_gap height="20px" ]
Tips
The cover of the battery station is not IP rated. Make sure the battery station is dustproofed and waterproofed.
[leap_gap height="20px" ]
In The Box
BS30 Intelligent Battery Box × 1
AC Cable × 1
Sticker × 1
User Manual × 1
[leap_gap height="20px" ]
Specifications
Form Factor: 353 × 267 × 148 mm
Tare Weight: 3.95 kg
Charging Time:
Approx. 30 min (charging two TB30 batteries from 20% to 90%)
Approx. 50 min (charging two TB30 batteries from 0% to 100%)
Maximum Input Power: 100-240 VAC, 50/60 Hz
Output Power: 525 W
Operating Temperature: -20 to 40 °C (14° to 104° F)
[leap_gap height="20px" ]
Compatibility
TB30 Battery，WB37 Battery