|
Description |
Straight swap upgrade for existing Multiframes. The radical Z arm design of the Vulcan Mantis offers unparalelled forward camera view, keeping arms and props out of the shot even with a forward facing camera during fast forward flight. You can even look up! Flight characteristics are fantastic, with great stability and handling. The raised arms are also an invaluable aid to the pilot for machine orientation in the air. Z arms can be fitted in any positions on your frame according to preference.
No special setup is required in your flight controller and the Z arms are a 'straight swap' upgrade for existing Vulcan Multiframes. |
Vulcan Mantis Z Arm 440mm - RED Straight swap upgrade for existing Multiframes. The radical Z arm design of the Vulcan Mantis offers unparalelled forward camera view, keeping arms and props out of the shot even with a forward facing camera during fast forward flight. You can even look up!
Flight characteristics are fantastic, with great stability and handling. The raised arms are also an invaluable aid to the pilot for machine orientation in the air. Z arms can be fitted in any positions on your frame according to preference. No special setup is required in your flight controller and the Z arms are a 'straight swap' upgrade for existing Vulcan Multiframes.
Z Arm 350mm RED (inc Carbon Fibre brace plates & hardware) |
Made from 1.5mm highest quality carbon fibre, the motor ring is designed to be used under the standard motor mount when a top mounting position for the motor is used. This spreads the load on the bolts on the underside of the arm, and offers greater support for the motor mount when managing the increased rotational offset of the motor in this configuration.
Includes 1 x motor ring, 3 x 30mm pillars, 6 x 10mm M3 bolts and washers
The MultiFrame concept is one of simplicity and flexibility, designed for the serious flyer and ideal for Professional Aerial Photography and other commercial applications. We have been flying these frames for some time now and can clearly state they are the best frames we've used!
Made from high grade Carbon Fibre, with custom moulded aluminium alloy arms, they are the strongest, stiffest, vibration free airframes you'll find, and considerably lighter than a Droidworx equivalent!
How stong are they? See the bottom of this listing...
The MultiFrame concept means that by using the same few parts to make all frames, when you buy a frame, you are not stuck with the configuration you choose at the time, but by adding or removing arms you can create any frame layout you choose, including Y6, Reverse Y6, + Quad, X Quad, X8, I Hexa, V Hexa, I Octo & V Octo. Frames sizes are 900mm or 1200mm. Landing legs come in Standard Height (178mm) or High Clearance (304mm) for use with professional camera mounts. Legs can be fitted anywhere on any arm to allow the best combination of clear camera view, stabillity on landing and balance in the air. And if the worst should happen and you damage your airframe, parts are very affordable! |
