DJI Spark - Quick-release Folding Propellers
Powerful propulsion with a fold able, easy to mount, and durable design.
Fold able and light.Push type design allows for quick mounting and detaching.
Specifications
Diameter × Thread Pitch: 4.7×3.0 inch (11.94×7.62 cm)Weight (single one): 2.5 g
In the Box
4730S Propeller Pair × 1
DJI FPV Goggles V2
Overview
The DJI FPV Goggles V2 with DJI O3 image transmission features high definition, low latency, long-distance transmission, and strong anti-interference capabilities. The DJI FPV Goggles Battery in the box supports up to 110 minutes of flight when fully charged.
Highlights
High definition, low latency, strong immersion, long-distance transmission, and strong anti-interference capabilities.
Battery in the box supports up to 110 minutes of flight when fully charged.
Tips
Avoid exposing the inside of the goggles to direct sunlight.
Dual frequency is only available when used with the DJI FPV Drone. If used with DJI FPV Air Unit, only 5.8 GHz is supported. Due to local policies and regulations, the 5.8 GHz frequency band is currently unavailable in some countries, including (but not limited to) Japan, Russia, Israel, Ukraine, and Kazakhstan. Please use the 2.4 GHz frequency band when operating in these locations, and always check local rules and regulations before use, as they may change over time.
Always follow the local laws and regulations when using the goggles. VLOS is legally required in some regions and countries, and it is always recomended to use a spotter when maintaining VLOS is not possible.
In The Box
DJI FPV Goggles V2 (inc. foam padding) ×1
DJI FPV Goggles Battery ×1
DJI FPV Goggles Power Cable (USB-C) ×1
DJI FPV Goggles Antenna (Dual Band) ×4
Headband ×1
USB-C cable ×1
Sleeve ×1
Specifications
DJI FPV Goggles V2
Weight: Approx. 420 g (headband and antennas included)
Dimensions: 184×122×110 mm (antennas excluded)
202×126×110 mm (antennas included)
Screen Size: 2-inches (×2)
Screen Refresh Rate: 144 Hz
Communication Frequency: 2.400-2.4835 GHz
5.725-5.850 GHz
Transmitter Power (EIRP): 2.400-2.4835 GHz
FCC: ≤ 28.5 dBm
CE: ≤ 20 dBm
SRRC: ≤ 20 dBm
MIC: ≤ 20 dBm
5.725-5.850 GHz
FCC: ≤ 31.5 dBm
CE: ≤ 14 dBm
SRRC: ≤ 19 dBm
Communication Bandwidth: 40 MHz (Max.)
Live View Mode: Low-Latency Mode: 810p/120fps ≤ 28ms*
High-Quality Mode: 810p/60fps ≤ 40ms*
* A 150° FOV is available when shooting at 50 or 100 fps. For other frame rates, the FOV will be 142°."
Max Video Bitrate: 50 Mbps
Transmission Range: 10 km (FCC), 6 km (CE), 6 km (SRRC), 6 km (MIC)
Video Format: MP4 (Video format: H.264)
Supported Video and Audio Playback Formats: MP4, MOV, MKV (Video format: H.264; Audio format: AAC-LC, AAC-HE, AC-3, MP3）
Operating Temperature: 0° to 40° C (32° to 104° F)
Power Input: Dedicated DJI Goggles batteries or other 11.1.-25.2 V batteries.
FOV: 30° to 54°; Image size: 50-100%
Interpupillary Distance Range: 58-70 mm
Supported microSD: Cards microSD (up to 256 GB)
DJI FPV Goggles Battery
Capacity: 1800 mAh
Voltage: 9 V (Max.)
Type: LiPo 2S
Energy: 18 Wh
Charging Temperature: 0° to 45° C
Max Charging Power: 10 W
Battery Life: Approx. 110 minutes (measured in an environment of 25°C at maximum brightness level)
Compatibility
DJI FPV Drone
DJI FPV Remote Controller 2
DJI FPV Air Unit
DJI FPV Remote Controller
XT90-S Anti-Spark Connector (2pairs/bag)
With the growing popularity of high voltage setups on R/C model helicopters, EDFs and airplanes, sparking battery connections are increasingly becoming the biggest enemy to your electronics. All the anti-spark systems in the market today require some sort of modification or DIY work before use. Now, we have just the solution. XT-90S is based on the popular XT90 but now integrates an anti-spark system. With the XT90-S, no need to invest to a secondary anti-spark system (which provides an additional failure point to your system). 100% compatible with existing XT90. Comes with a soldering cover to protect the solder point. Spec. Weight: 15.3g(Each Pair) Size: 49x21x10mm(Each Pair) IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."
Remote Controller Silicone Cover
Threeking Phantom 4/3 Controller Soft Thick Silicone Skin Case Cover with Letter for DJI Phantom 4/3 Inspire 1 M100 Remote Controller (Transparent)- Fits DJI Phantom 4 / 4Pro (Not fit Phantom 4 Pro+) Phantom 3 Professional & 4K & Advanced (Not fit Phantom 3 Standard) DJI Inspire 1 Remote Controller
- Protects your device from scratches, dusts and adds more grip;Case with letter allows easy access to all ports, buttons and functions
- High-class silicone,can be washed in the water.Dust proof,Anti slip,Anti collision and fits your controller perfectly.
- Package:1 x Protect case.(The Remote Controller just for reference,Not included!!!)
- The package box with Brand"Threeking".If not,that is fake,Please complain to Amazon directly to get back all your money and say they offer fake products.The only seller is:THREE KING TECH.